TECHNICAL SPECIFICATIONS
All specification shown below are typical, unless otherwise stated. Please note that Arcam’s policy is one of continuous improvement. We therefore reserve the right to change the material, dimensions, specifications or design of our products shown or referred to herein at any time and without prior notice. Illustrations used in our leaflets or on our website are intended as a guide only. E&OE 07/07.
DV27 DVD PLAYERFMJ DV27
GENERAL
Power Requirements	115V or 230V ac, set by voltage selector switch, 100V to special order
Power Consumption	45 VA max
Dimensions	430mm x 85mm x 280mm
Weight	6.1kg nett
VIDEO OUTPUTS (R=ohms)
Composite video on 1 x gold plated phono, IV pk-pk into 75R
S-Video on 1 x 4 pin mini DIN, Y IV pk-pk in 75R, C 0.3V pk-pk into 75R
Component video on 3 gold plated phone sockets, Y IV pk-pk into 75R, Pb and Pr 0.7V pk-pk into 75R SCART socket with RGB video, all 0.7V into 75R, composite video IV into 75R, and stereo audio. Auto switching of TV with aspect ratio control. RGB also available on component video sockets.
Progressive outputs (480p) on 3 gold plated phono sockets, Y=IV pk-pk, Pb and Pr 0.7V pk-pk, all into 75R
AUDIO OUTPUTS
Analogue audio outputs	2 pairs of stereo outputs on gold plated phono sockets
Output level	2.2V rms for 0dB signal (4.4V rms for HDCD discs)
Frequency response	20Hz to 20kHz (+0.1, -0.5 dB)
THD+N	<0.005% for 1kHz 0dB signal, measured 20Hz, unweighted
S/N ratio	105dB measured 20Hz-20kHz, unweighted
Digital audio output (IEC958)	PCM/Dolby Digital/MPEG/DTS (pass through) on gold plated phono (coaxial) and Toslink (optical)
Supported disc sampling rates	up to 48kHz/24 bit (Toslink) 96kHz/24 bit (co-axial)
Remote bus input supports modulated RC-5 code via a 3.5mm jack
Disc types replayed	DVD-Video, CD Video, SVCD, CD-Audio (inc. CD-R, CD-RW) with PCM, HDCD or MP3 encoding