| TECHNICAL SPECIFICATIONS | |
| All specification shown below are typical, unless otherwise stated. Please note that Arcam’s policy is one of continuous improvement. We therefore reserve the right to change the material, dimensions, specifications or design of our products shown or referred to herein at any time and without prior notice. Illustrations used in our leaflets or on our website are intended as a guide only. E&OE 07/07. |
|
DIGITAL TUNER FMJ DT26 |
|
|
|
 |
|
| Tuning range | Band III 174 – 240 MHz L Band 1452 – 1492 MHz |
|
|
| Sensitivity | Better than -91dBm |
|
|
| Maximum input signal level | 0dBm |
|
|
| Total demodulation capacity | 1 x 256kbit/sec/audio sub-channel at protection level 3, plus Fast Information Channel |
|
|
| Outputs | |
|
|
| Digital outputs | coaxial and optical 48kHz SPDIF |
|
|
| Analogue audio outputs | 2.4V rms fixed |
|
|
| Headphones output | Up to 100mW into 32ohms |
|
|
| General | |
|
|
| Output impedance | <100ohms |
|
|
| Signal/Noise ratio | >90dB |
|
|
| Power consumption (maximum) | <30VA |
|
|
| Size W/D/H mm. inc. feet. | 430x310x100 |
|
|