| TECHNICAL SPECIFICATIONS | |
| All specification shown below are typical, unless otherwise stated. Please note that Arcam’s policy is one of continuous improvement. We therefore reserve the right to change the material, dimensions, specifications or design of our products shown or referred to herein at any time and without prior notice. Illustrations used in our leaflets or on our website are intended as a guide only. E&OE 07/07. |
|
MODULAR
PRE-AMPLIFIER FMJ
C30 |
|
|
|
| Phono Cartridge Input | MC* MM* |
 |
|
| Input sensitivity | 270uV 2.7mV |
| Impedance | 300ohms47kohms |
| Signal / noise ratio (CCIR) | -73dB -79dB |
| Overload margin | 35dB |
|
|
| Line and Tape Inputs | |
|
|
| Nominal sensitivity | 250mV - 2V |
| Input impedance | 22kohms |
| Signal/noise ratio** | -103dB | |
| Tone Controls | |
|
|
| Max boost/cut | +/-12dB at 80Hz, 12kHz |
|
|
| Outputs | |
|
|
| Nominal output level | 700mV |
| Maximum output level | 8V RMS |
| Output impedance | <50ohms |
|
|
| Headphones Output | |
|
|
| Maximum output level into 600ohms | 5V |
| Output impedance | 4.7ohms |
| General | |
|
|
| Power consumption (maximum) | 30VA |
| Size W/D/H mm. inc. feet. | 430x370x110 |
| Weight (nett) | 9kg (20lbs) | |
|
|
|