| TECHNICAL SPECIFICATIONS | |
| All specification shown below are typical, unless otherwise stated. Please note that Arcam’s policy is one of continuous improvement. We therefore reserve the right to change the material, dimensions, specifications or design of our products shown or referred to herein at any time and without prior notice. Illustrations used in our leaflets or on our website are intended as a guide only. E&OE 07/07. |
|
INTEGRATED AMPLIFIER FMJ A22 |
|
|
|
 |
|
| Continuous Power Output, | |
|
|
| Per Channel | |
|
|
| Both channels, 8ohms, 20Hz-20kHz | 100W |
|
|
| Single channel, 4ohms, 1kHz | 170W |
|
|
| Distortion, 8ohms, 80% power, 1kHz | 0.02% |
|
|
| Phono Cartridge Input | MM* MC* |
|
|
| Input sensitivity | 2.6mV 260uV |
|
|
| Line and Tape Inputs | |
|
|
| Input sensitivity | 300mV |
|
|
| Input impedance | 20kohms |
|
|
| Noise (CCIR) ref. rated power | -100dB |
|
|
| Preamplifier Outputs | |
|
|
| Nominal output level | 740mV |
|
|
| Output impedance | 50ohms |
|
|
| General | |
|
|
| Power consumption (maximum) | 800VA |
|
|
| Size W/D/H mm. inc. feet. | 430x380x100 |
|
|
* Via optional module, switchable for MM (Moving Magnet) or low output MC (Moving Coil) cartridge. |
|