| TECHNICAL SPECIFICATIONS | |
| All specification shown below are typical, unless otherwise stated. Please note that Arcam’s policy is one of continuous improvement. We therefore reserve the right to change the material, dimensions, specifications or design of our products shown or referred to herein at any time and without prior notice. Illustrations used in our leaflets or on our website are intended as a guide only. E&OE 07/07. |
|
FM/AM STEREO TUNER FMJ T21 |
|
|
|
 |
|
| FM Section | |
|
|
| FM tuning range | 87.5 to 108.0 MHz |
|
|
| FM sensitivity (IHF/75ohms) |
typically 1.8uV |
|
|
| Ultimate signal/noise (CCIR) |
mono 75dB stereo 68dB |
|
|
| Capture ratio | 1.5dB |
|
|
| Total harmonic distortion | mono 0.1% |
|
|
| (30% modulation, 1kHz) | stereo 0.2% |
|
AM Section |
|
|
| Tuning range | (AM-MW) 522 to 1611 kHz (AM-LW) 140 to 290 kHz |
|
|
| S/N ratio (30% mod. 50mV input) |
45dB |
|
|
| Total harmonic distortion | 0.5% |
|
|
| General | |
|
|
| Output level (full modulation) |
1Vrms |
|
|
| Output impedance | 50ohms |
|
|
| Power consumption (maximum) |
8VA |
|
|
| Size W/D/H mm. inc. feet. | 430x290x85 |
|
|