| |
|
|
|
|
|
| Dolby Pro Logic
Home Cinema Amplifiers |
Xeta 2 |
AV 50 |
| Continuous Power Output |
| Left+Centre+Right, 8ohms, 20hz-20kHz |
55W/(centre) |
50W/ch |
| Left+Centre+Right, 4ohms, 1kHz |
100W (centre) |
65W/ch |
| Rear channel, 8ohms, 1kHz |
2x50W |
2x50W |
| Peak current rating, front amplifier(s) |
+/-18A |
+/-10A |
| Distortion, 1kHz, 8ohms, 80% rated output |
0.05% |
0.05% |
| Disc Stage |
| Input sensitivity |
- |
 |
| Input impedance |
- |
|
| Line Inputs |
| Input sensitivity |
390mV nominal |
500mV |
| Input impedance |
20kohms |
20kohms |
| Noise (CCIR front channels) ref. rated
output |
-94dB |
-90dB |
| Overload margin |
20dB |
17dB |
| Preamp Outputs |
| Nominal output level |
700mV |
540mV |
| Maximum output level |
8V |
5V |
| Output impedance |
50ohms |
220ohms |
| Frequency response (sub woofer only) |
-3dB@200Hz |
-3dB@200Hz |
| Video Secction |
| Video signal type |
PAL and NTSC |
PAL and NTSC |
| Nominal input/output level (composite) |
1V P-P. 75ohms |
1V P-P. 75ohms |
| S-Video Y: |
- |
- |
| S-Video C: |
- |
- |
| General |
| Power consumption (maximum) |
400VA |
600VA |
| Size W/D/H |
430x315x92 |
430xz330x95 |
| Weight, nett. |
6.1kg |
6.5kg |
|
All specifications shown below are typical, unless otherwise
stated. Please note that Arcam's policy is one of continuous
improvement. We therefore reserve the right to change the material,
dimensions, specifications or design of our products shown or
referred to herein at any time and without prior notice. Illustrations
used in our leaflets are intended as a guide only. E&OE
8-97
*Arcam and Xeta are registered trademarks
of A&R Cambridge Ltd. "Dolby", "Dolby Stereo",
"Dolby Surround" and "Pro Logic" are trademarks
of Dolby Laboratories Licensing Corporation.
Other Technical Specifications
Integrated Amplifiers
| Power Amplifiers |
CD Players and D/A Converters
| Tuners
back
to top
|
|
