|
|
| |
|
A custom designed fibreglass PCB minimises signal path length for the best sound
quality whilst retaining many of the useful control features
of the Alpha 9 integrated amp. There are two independent sets
of line level outputs which can be used for simple Zone 1/Zone
2 operation. The Alpha 9C is fully remote controlled and comes
with a useful Handi-Remote which allows control of Arcam CD
player and tuner functions in addition to amplifier source selection,
volume and muting.
- Short signal paths and low noise circuits give clean and natural sound
- Ideal for use with Alpha 9P or 10P Power Amplifiers
- Full remote control of volume, muting and input selection for easy operation
- Two zone function allows simple multi-room use with a second integrated amplifier
- Gold plated connectors throughout
- High performance separate headphones amplifier
TECHNICAL SPECIFICATIONS
| Frequency Response |
20Hz - 20kHz +/- 0.5dB |
| INPUTS |
|
| Line Inputs |
Sensitivity 200mV |
| Noise (ref 800mV output) |
-100dB typical ('DIRECT' IN) |
| Input impedance |
25k |
| A/Vloop input (A/V mode) |
Sensitivity 940mV |
| Input impedance |
30k |
| Phono board (if fitted) |
Sensitivity 5mV MM, 500uV MC |
| Noise (CCIR) ref 800mV output |
-85dB MM, -75dB MC |
| Input impedance |
47k MM, 300k MC |
| OUTPUTS |
|
| Main outputs |
|
| Nominal output level |
800mV |
| Maximum output level |
8V |
| Output impedance |
10 |
| Headphones |
|
| Maximum output level into 600 |
8V |
| Output impedance |
100 |
| Mains voltage |
230V/115+/-12% |
| Power consumption (max) |
20VA |
| Dimensions W/D/H mm |
430x310x110 |
back
to top
|
|
